02.01 Teflon® thin wall tube
Standard wall PTFE (polytetrafluorethylene) tubing for transfer of high purity products, chemicals, alimentary for cosmetic products. Also suitable for heat exchagers and as protective sleeve for cables.
02.02 T-Flex® type T1S Smooth bore Teflon® hose with stainless steel braid - standard wall
Construction:
T-FLEX® T1S is manufactured from virgin PTFE (polytetrafluorethylene) resin with AISI 304 stainless steel, high tensile braid.
Properties:
- Virtually resistant to all chemicals, except molten alkali metals or halogens at elevated temperatures.
- Temperature range: -70°C to +260°C.
- Non-sticking, easy to clean.
- Excellent mechanical resistance for vibrations and flexing.
- FDA approved resin that guarantees food, cosmetic and pharmaceutical applications.
- Non-flammable.
- Non-aging and very good U.V. resistance.
- Chemically inert.
- Good dielectric properties.
- Low coefficient of friction ensuring low pressure drop.
02.03 T-Flex® type TD1S Smooth bore Teflon® hose, double stainless steel braid - standard wall
Construction:
T-FLEX® TD1S is manufactured from virgin PTFE (polytetrafluorethylene) resin with a double AISI 304 stainless steel, high tensile braid.
Properties:
- Virtually resistant to all chemicals, except molten alkali metals or halogens at elevated temperatures.
- Temperature range: -70°C to +260°C.
- Non-sticking, easy to clean.
- Excellent mechanical resistance for vibrations and flexing.
- FDA approved resin that guarantees food, cosmetic and pharmaceutical applications.
- Non-flammable.
- Non-aging and very good U.V. resistance.
- Chemically inert.
- Good dielectric properties
- Low coefficient of friction ensuring low pressure drop.
02.04 T-Flex® type T1B Smooth, big bore Teflon® hose, with stainless steel braid - standard wall
Construction:
T-FLEX® T1B is manufactured from virgin PTFE (polytetrafluorethylene) resin with AISI 304 stainless steel, high tensile braid.
Bigger bore than T100S to assemble with hydraulic tail fittings.
Properties:
- Virtually resistant to all chemicals, except molten alkali metals or halogens at elevated temperatures.
- Temperature range: -70°C to +260°C.
- Non-sticking, easy to clean.
- Excellent mechanical resistance for vibrations and flexing.
- FDA approved resin that guarantees food, cosmetic and pharmaceutical applications.
- Non-flammable.
- Non-aging and very good U.V. resistance.
- Chemically inert.
- Good dielectric properties.
- Low coefficient of friction ensuring low pressure drop.
02.05 T-Flex® type TD1B Smooth big bore Teflon® hose, double stainless steel braid - standard wall
Construction:
T-FLEX® TD1B is manufactured from virgin PTFE (polytetrafluorethylene) resin with a double AISI 304 stainless steel, high tensile braid to suit hydraulic fittings in high pressure applications.
Properties:
- Resistant to most chemicals, except molten alkali metals or halogens at elevated temperatures.
- Temperature range: -70°C to +260°C.
- Non-sticking, easy to clean.
- Excellent mechanical resistance for vibrations and flexing.
- FDA approved resin for use in food, cosmetic and pharmaceutical applications.
- Non-flammable.
- Non-aging and very good U.V. resistance.
- Chemically inert.
- Good dielectric properties.
- Low coefficient of friction ensuring low pressure drop.
02.06 T-Flex® type T1HS Smooth bore Teflon® hose with stainless steel braid - heavy wall
Construction:
T-FLEX® T1HS is manufactured from virgin PTFE (polytetrafluorethylene) resin with AISI 304 stainless steel, high tensile braid. The heavy wall reduces the permeation to an absolute minimun for products with a small molecular structure.
Properties:
- Virtually resistant to all chemicals, except molten alkali metals or halogens at elevated temperatures.
- Temperature range: -70°C to +260°C.
- Non-sticking, easy to clean.
- Excellent mechanical resistance for vibrations and flexing.
- FDA approved resin that guarantees food, cosmetic and pharmaceutical applications.
- Non-flammable.
- Non-aging and very good U.V. resistance.
- Chemically inert.
- Good dielectric properties
- Low coefficient of friction ensuring low pressure drop
02.08 T-Flex® type T1D Smooth bore Teflon® hose, with stainless steel braid - Dash sizes to suit reusable fittings
Construction:
T-FLEX® T1D is manufactured from virgin PTFE (polytetrafluorethylene) resin with AISI 304 stainless steel, high tensile braid.
Properties:
- Virtually resistant to all chemicals, except molten alkali metals or halogens at elevated temperatures.
- Temperature range: -70°C to +260°C.
- Non-sticking, easy to clean.
- Excellent mechanical resistance for vibrations and flexing.
- FDA approved resin that guarantees food, cosmetic and pharmaceutical applications.
- Non-flammable.
- Non-aging and very good U.V. resistance.
- Chemically inert.
- Good dielectric properties
- Low coefficient of friction ensuring low pressure drop.
Fittings:
This hose size is specially developped to suit the American style reusable fittings.
02.09 T-1700 Smooth bore high pressure PTFE hose, double bunch-braided stainless steel braid - Dash sizes
Construction:
T-Flex® T-1700 is manufactured from antistatic PTFE (polytetrafluorethylene) resin with double, bunch braided AISI 304 stainless steel, high tensile braid. Double sintered PTFE for gas applications.
Properties:
- Virtually resistant to all chemicals, except molten alkali metals or halogens at elevated temperatures.
- Temperature range: -70°C to +260°C.
- Non-sticking, easy to clean.
- Excellent mechanical resistance for vibrations and flexing.
- FDA approved resin that guarantees food, cosmetic and pharmaceutical applications.
- Non-inflammable.
- Non-aging and very good U.V. resistance.
- Chemically inert.
- Good dielectric properties.
- Low coefficient of friction which ensures low pressure drop.
Fittings:
Special fittings for T-1700. Assembly by authorised dealers only.
02.10 T-2000 Smooth bore high pressure PTFE hose, double bunch-braided stainless steel braid - Dash sizes
Construction:
T-Flex® T-2000 is manufactured from antistatic PTFE (polytetrafluorethylene) resin with double, bunch braided AISI 304 stainless steel, high tensile braid.
Properties:
- Virtually resistant to all chemicals, except molten alkali metals or halogens at elevated temperatures.
- Temperature range: -70°C to +260°C.
- Non-sticking, easy to clean.
- Excellent mechanical resistance for vibrations and flexing.
- FDA approved resin that guarantees food, cosmetic and pharmaceutical applications.
- Non-inflammable.
- Non-aging and very good U.V. resistance.
- Chemically inert.
- Good dielectric properties.
- Low coefficient of friction which ensures low pressure drop.
Fittings:
Special fittings for T-2000. Assembly by authorised dealers only.
03.01 EASYCRIMP® type TCB1E Convoluted Teflon® hose with stainless steel braid
Construction:
Low profile helically convoluted PTFE (polytetrafluorethylene) liner with a AISI 304 high tensile,stainless steel braid.
Properties:
- Virtually resistant to all chemicals, except molten alkali metals or halogens at elevated temperatures.
- Temperature range: -70°C to +260°C.
- Non-sticking, easy to clean.
- Excellent mechanical resistance for vibrations and flexing.
- FDA approved resin that guarantees food,cosmetic and pharmaceutical applications.
- Non-flammable.
- Non-aging and very good U.V. resistance.
- Chemically inert.
- Good dielectric properties.
- Low coefficient of friction ensuring low pressure drop.
03.02 TAPE-WRAPPED type TWCB1S Convoluted PTFE hose with stainless steel braid
Construction:
Low profile helically convoluted PTFE (polytetrafluorethylene) liner, glassfiber reinforced, with a AISI 304 high tensile, stainless steel braid.
Properties:
- Virtually resistant to all chemicals, except molten alkali metals or halogens at elevated temperatures.
- Temperature range: -70°C to +260°C.
- Non-sticking, easy to clean.
- Excellent mechanical resistance for vibrations and flexing.
- FDA approved resin that guarantees food, cosmetic and pharmaceutical applications.
- Non-inflammable.
- Non-aging and very good U.V. resistance.
- Chemically inert.
- Good dielectric properties.
- Low coefficient of friction which ensures low pressure drop.
03.03 TAPE-WRAPPED HI-VAC type TWCW1B1S Convoluted PTFE hose for vacuum with stainless steel braid
Construction:
Low profile helically convoluted PTFE (polytetrafluorethylene) liner, glassfiber reinforced, with a spiral for vacuum and AISI 304 high tensile,stainless steel braid.
Properties:
- Virtually resistant to all chemicals, except molten alkali metals or halogens at elevated temperatures.
- Temperature range: -70°C to +260°C.
- Non-sticking, easy to clean.
- Excellent mechanical resistance for vibrations and flexing.
- FDA approved resin that guarantees food,cosmetic and pharmaceutical applications.
- Non-inflammable.
- Non-aging and very good U.V. resistance.
- Chemically inert.
- Good dielectric properties.
- Low coefficient of friction which ensures low pressure drop.
04.01 Convo-Lab® type TCS Convoluted Teflon® hose - standard wall
Construction:
A helically convoluted PTFE (polytetrafluorethylene)low pressure hose giving good flexibility and kink resistance, standard wall.
Properties:
- Resistant to most chemicals, except molten alkali metals or halogens at elevated temperatures.
- Temperature range: -70°C to +260°C.
- Non-sticking, easy to clean.
- Excellent mechanical resistance for vibrations and flexing.
- FDA approved resin for use in food,cosmetic and pharmaceutical applications.
- Non-flammable.
- Non-aging and very good U.V. resistance.
- Chemically inert.
- Good dielectric properties.
- Low coefficient of friction ensuring low pressure drop.
04.02 Convo-Tech® type TCM Convoluted Teflon® hose - medium wall
Construction:
A helically convoluted PTFE (polytetrafluorethylene)pressure hose, medium wall, giving good flexibility,kink, and vacuum resistance.
Properties:
- Resistant to most chemicals, except molten alkalimetals or halogens at elevated temperatures.
- Temperature range: -70°C to +260°C.
- Excellent mechanical resistance for vibrationsand flexing.
- FDA approved resin for use in food,cosmetic and pharmaceutical applications.
- Non-flammable.
- Non-aging and very good U.V. resistance.
- Chemically inert.
- Good dielectric properties.
- Low coefficient of friction ensuring lowpressure drop.
04.03 Convo-Tech® type TCMW1 Convoluted Teflon® hose with vacuum wire - medium wall
Construction:
A helically convoluted PTFE (polytetrafluorethylene)suction/pressure hose, medium wall. The external AISI 304 wire support guarantees high vacuum resistance, good flexiblity and extreme kink resistance.
Properties:
- Resistant to most chemicals, except molten alkalimetals or halogens at elevated temperatures.
- Temperature range: -70°C to +260°C.
- Non-sticking, easy to clean.
- Excellent mechanical resistance for vibrations and flexing.
- FDA approved resin for use in food, cosmetic and pharmaceutical applications.
- Non-flammable.
- Non-aging and very good U.V. resistance.
- Chemically inert.
- Good dielectric properties.
- Low coefficient of friction ensuring low pressure drop.
04.05 Convo-Flex® type TCMB1 Convoluted Teflon® hose with stainless steel braid - medium wall
Construction:
A helically convoluted PTFE (polytetrafluorethylene)inner tube, medium wall, with an outer cover of AISI304 high tensile stainless steel braid.
Properties:
- Virtually resistant to all chemicals, except molten alkali metals or halogens at elevated temperatures.
- Temperature range: -70°C to +260°C.
- Non-sticking, easy to clean.
- Excellent mechanical resistance for vibrations and flexing.
- FDA approved resin that guarantees food,cosmetic and pharmaceutical applications.
- Non-flammable.
- Non-aging and very good U.V. resistance.
- Chemically inert.
- Good dielectric properties.
- Low coefficient of friction ensuring low pressure drop.
Typical applications:
Convo-Flex® TCMB1 should be specified when pressures or vacuum are applied. Recommended on all tafted flange assemblies.
04.06 Convo-Flex® type TCMW1B1 Convoluted Teflon® hose with vacuum wire and stainless steel braid - medium wall
Construction:
A helically convoluted PTFE (polytetrafluorethylene)suction/pressure hose, medium wall, with external vacuum wire and high tensile stainless steel braid. The hose is very good vacuum and kink resistance.
Properties:
- Virtually resistant to all chemicals, except molten alkali metals or halogens at elevated temperatures.
- Temperature range: -70°C to +260°C.
- Non-sticking, easy to clean.
- Excellent mechanical resistance for vibrations and flexing.
- FDA approved resin that guarantees food,cosmetic and pharmaceutical applications.
- Non-flammable.
- Non-aging and very good U.V. resistance.
- Chemically inert.
- Good dielectric properties.
- Low coefficient of friction ensuring low pressure drop.
Typical applications:
Convo-Flex® TCMW1B1 should be specified for steam applications or when high vacuum hose applications are required. Generally excellent mechanical strength.
04.08 Convo-Flex® type TCMB6 Convoluted Teflon® hose with polypropylene braid - medium wall
Construction:
A helically convoluted PTFE (polytetrafluorethylene)hose, heavy wall, with an outer cover of polypropylene yarn braid.
Properties:
- Virtually resistant to all chemicals, except molten alkali metals or halogens at elevated temperatures.
- Temperature range: -70°C to +90°C.
- Non-sticking, easy to clean.
- Excellent mechanical resistance for vibrations and flexing.
- FDA approved resin that guarantees food,
- Non-flammable.
- Non-aging and very good U.V. resistance.
- Chemically inert.
- Good dielectric properties.
- Low coefficient of friction ensuring low pressure drop.
Typical applications:
Convo-Flex® TCMB6 should be specified when good flexibility and reduced weight are required for pressure applications.
04.09 Convo-Flex® type TCMW1B6 Convoluted Teflon® hose with vacuum wire and polypropylene braid - medium wall
Construction:
A helically convoluted PTFE(polytetrafluorethylene)suction/pressure hose, medium wall, with external vacuum wire and polypropylene yarn braid.
Properties:
- Virtually resistant to all chemicals, except molten alkali metals or halogens at elevated temperatures.
- Temperature range: -30°C to +90°C.
- Non-sticking, easy to clean.
- Excellent mechanical resistance for vibrations and flexing.
- FDA approved resin that guarantees food, cosmetic and pharmaceutical applications.
- Non-flammable.
- Non-aging and very good U.V. resistance.
- Chemically inert.
- Good dielectric properties.
- Low coefficient of friction ensuring low pressuredrop.
Typical applications:
Convo-Flex® TCMW1B6 should be specified where vibrations or frequent handling are applied in combination with vacuum.
05.01 CORRUFLEX® Teflon® lined, corrugated metal hose with stainless steel braid
Construction:
Corrugated flexible metal hose assembly fitted with a PTFE (polytetrafluorethylene) lining which is locked in position.
Typical applications:
CORRUFLEX® hoses are designed to be used where flow rates are important, but flexibility is limited.The external metal hose insures extra mechanical protection in very dangerous situations.
05.02 Convo-Flex® Dip tube assembly
Construction:
Dip tube assemblies are constructed from a smooth,heavy wall PTFE (polytetrafluorethylene) liner with a straight end or 90° elbow. The Dip tube is screwed together with a PTFE (polytetrafluorethylene) lined coupling according customer specification.
Typical applications:
The main applications for Dip tube assemblies are for inserting into drums, tanks or other vessels,for either filling ar emptying fluids through the pipe.
05.03 Electrical traced hoses
Construction:
Helically convoluted PTFE (polytetrafluorethylene)hose, heavy wall, reinforced with a AISI 304 stainless steel wire and high tensile braid.Temperature sensored by thermocouple or PT100 .Insulation according to required temperature.External AISI 304 braid for protection.
Typical applications:
Designed to maintain or heat the fluid passing through the hose.
Questionary:
- Incoming fluid temperature.
- Required temperature.
- Ambient temperature(indoor or outdoor installation)
- Temperature tolerance.
- Ex environment or not.
- Any further external protection(Rubber hose or others).
05.04 Double jacketed hoses
Construction:
Double jacketed PTFE (polytetrafluorethylene)/metal hose. Inner core of smooth or convoluted PTFE (polytetrafluorethylene) with wire helix and stainless steel braid. Jacketed metal hose to pass hot oil or low pressure steam to heat the internal hose.
05.05 Hose protections - Silicon protection sleeve
Is widely used in food, cosmetic and pharmaceutical industries to improve the external smoothness and cleanability of the hose. The cover is crimped on the couplings. Temperature range up to 180 °C
05.05 Hose protections - Rubber protection sleeve
As extra mechanical protection against abrasion and kinking. The cover is crimped on the couplings. Temperature range up to 120°C.
05.05 Hose protections - Poleolefin heatshrink hose
The poleolefin heatshrink gives a smooth and shiny finish. It improves the external cleanability of the hose. Due to the properties of the heatshrink the hose will be less flexible. Temperature range up to 90°C. Black, other colours on request.
05.06 Hose protections - Protection helix
Protection helix in AISI 304 to avoid abrasion of the braid. As alternative to rubber cover in case of elevated temperatures.
05.06 Hose protections - Scuff rings
Lightweight abrasion protection. Solves problems in installations where abrasion of the braid might be caused by pump vibrations. Temperature range up to 120°C.
05.06 Hose protections - PVC coil
Lightweight PVC flat spiral. Insures protection where the hose is in contact with machinery or on manifolds where hoses are installed close to each other.
05.07 Hose protections - Springuard
Springuard in AISI 304. For applications where extreme flexing might damage the end connections.
05.07 Hose protections - Rubber hose guard
Rubber EPDM protection guard. Avoids kinking of the hose. Same application as springuard but limited in temperature up to 120°C.
50.01 Hose fittings with PTFE tail - steel - crimping ferrules
FT1---
Crimping ferrule for smooth bore PTFE hose T1S.
FTD1---
Crimping ferrule for smooth bore PTFE hose TD1S.
FG1---
Crimping ferrule for smooth bore PTFE hose T1S, TD1S, T1HS, TG1S and convoluted PTFE hose TCS, TCM, TCAM.
50.02 Hose fittings with PTFE tail - steel - BSP threaded
DKRO
Hose fittings with PTFE tail - steel - Female insert 60° cone and BSPP nut.
AKRO
Hose fittings with PTFE tail - steel - Male BSPT insert taper thread.
51.01 Hose fittings with PTFE tail - stainless steel AISI 304L / 316L - crimping ferrules
FT1---
Crimping ferrule for smooth bore PTFE hose T1S.
FTD1---
Crimping ferrule for smooth bore PTFE hose TD1S.
FG1---
Crimping ferrule for smooth bore PTFE hose T1S, TD1S, T1HS, TG1S and convoluted PTFE hose TCS, TCM, TCAM.
51.02 Hose fittings with PTFE tail - stainless steel AISI 316L - standpipes & female BSPP
RSL2---
Standpipe for compression fittings according to DIN 2353L.
DKR2---
Female insert 60° cone and BSPP nut.
DFR2---
Female insert flat seat and BSPP nut.
51.03 Hose fittings with PTFE tail - stainless steel AISI 316L -male BSPP
AGR2---
Male BSPP insert with hexagon, 60° cone, parallel thread.
AGR2---
Male BSPP insert 60° cone, parallel thread.
AFR2---
Male BSPP insert with hexagon, flat face, parallel thread.
51.04 Hose fittings with PTFE tail - stainless steel AISI 316L -male BSP
AFR2---
Male BSPP insert without hexagon flat face, parallel thread.
AKR2---
Male BSPT insert, with hexagon, taper thread.
AKR2---
Male BSPT insert, without hexagon, taper thread.
51.05 Hose fittings with PTFE tail - stainless steel AISI 316L -male NPT
AGN2---
Male NPT insert with hexagon.
AGN2---
Male NPT insert without hexagon.
52.01 Hose fittings with PTFE tail - brass - crimping ferrules
FT4---
Crimping ferrule for smooth bore PTFE hose T1S.
FTD4---
Crimping ferrule for smooth bore PTFE hose TD1S.
FGO---
Crimping ferrule for smooth bore PTFE hose T1S, TD1S, T1HS,TG1S and convoluted PTFE hose TCS, TCM, TCAM.
52.02 Hose fittings with PTFE tail - brass - standpipes - female BSPP
RSL4---
Standpipe for compression fittings according to DIN 2353L.
DKR4---
Female insert 60° cone and BSPP nut.
DFR4---
Female insert flat seat and BSPP nut.
52.03 Hose fittings with PTFE tail - brass - male BSPP
AGR4---
Male BSPP insert with hexagon, 60° cone, parallel thread.
AGR4---
Male BSPP insert 60° cone, parallel thread.
AFR4---
Male BSPP insert with hexagon, flat face, parallel thread.
52.04 Hose fittings with PTFE tail - brass - male BSP
AFR4---
Male BSPP insert without hexagon flat face, parallel thread.
AKR4---
Male BSPT insert, with hexagon, taper thread.
AKR4---
Male BSPT insert, without hexagon, taper thread.
53.01 Hose fittings with hydraulic tail - steel - crimping ferrules
FEO---
Crimping ferrule for smooth bore PTFE hose T1B and braided, convoluted PTFE hose Easycrimp®, Convo-Flex®, Tape Wrapped.
53.02 Hose fittings with hydraulic tail - steel - standpipes
RSLOH---
Standpipe for compression fittings according to DIN 2353L.
RSSOH---
Standpipe for compression fittings according to DIN 2353S.
RSFOH---
Standpipe for compression fittings according French type.
53.03 Hose fittings with hydraulic tail - steel - female metric
DKLOH---
Universal metric insert light series to 20078 for fittings with 24° cone and for connector according DIN 2353L.
DKOLOH---
Metric O-ring insert, light series to DIN 20078,form P for fittings with 24° cone and for pipe connections according DIN 2353L.
DKOSOH---
Metric O-ring insert, heavy series to DIN 20078, form P forfittings with 24° cone and for pipe con-nections according DIN 2353S.
53.04 Hose fittings with hydraulic tail - steel - female metric
DKMOH---
Metric female, 60° cone DIN 3863, thread according Din 3770.
DKFOH---
Metric insert, 24° cone for connection to french pipe series.
53.05 Hose fittings with hydraulic tail - steel - male metric
CELOH---
Male metric insert, light series, according to DIN 20078, form D.
CESOH---
Male metric insert, heavy series, according to DIN 20078, form E.
CEFOH---
Male metric insert French type.
53.06 Hose fittings with hydraulic tail - steel - female BSPP
DKROH---
Female insert 60° cone and BSPP nut.
DKOROH---
Female insert 60° cone, O-ring sealing and BSPP nut.
DFROH---
Female insert flat seat and BSPP nut.
53.07 Hose fittings with hydraulic tail - steel - male BSP
AGROH---
Male BSPP insert 60° cone, parallel thread.
AFROH---
Male BSPP insert flat face, parallel thread.
AKROH---
Male BSPT insert, taper thread.
53.08 Hose fittings with hydraulic tail - steel - male NPT
AGNOH---
Male NPT insert.
53.09 Hose fittings with hydraulic tail - steel - JIC threaded
DKJOH---
Female UNF insert, 37° seat.
AGJOH---
Male UNF insert, 74° JIC seat.
54.01 Hose fittings with hydraulic tail - stainless steel AISI 304L - crimping ferrules
FE1---
Crimping ferrule for smooth bore PTFE hose T1B and braided, convoluted PTFE hose Easycrimp®, Convo-Flex®, Tape Wrapped.
54.02 Hose fittings with hydraulic tail - stainless steel AISI 316L / AISI 316Ti - standpipes
RSL2H---
Standpipe for compression fittings according to DIN 2353L.
RSS2H---
Standpipe for compression fittings according to DIN 2353S.
54.03 Hose fittings with hydraulic tail - stainless steel AISI 316L / AISI 316Ti - female metric
DKL2H---
Universal metric insert light series to 20078 for fittings with 24° cone and for connector according to DIN 2353L.
DKOL2H---
Metric O-ring insert, light series to DIN 20078,form P for fittingswith 24° cone and for pipe connections according to DIN 2353L.
DKOS2H---
Metric O-ring insert, heavy series to DIN 20078,form P for fittings with 24° cone and for pipe connections according to DIN 2353S.
54.04 Hose fittings with hydraulic tail - stainless steel AISI 316L / AISI 316Ti - female metric
DKS2H---
Universal metric insert, heavy series to DIN 20078 for fittings with 24° cone for connector according DIN 2353S
54.05 Hose fittings with hydraulic tail - stainless steel AISI 316L / AISI 316Ti - male metric
CEL2H---
Male metric insert, light series, according to DIN 20078, form D.
CES2H---
Male metric insert, heavy series,according to DIN 20078, form E.
54.06 Hose fittings with hydraulic tail - stainless steel AISI 316L / AISI 316Ti - female BSPP
DKR2H---
Female insert 60° cone and BSPP nut.
DFR2H---
Female insert flat seat and BSPP nut.
54.07 Hose fittings with hydraulic tail - stainless steel AISI 316L / AISI 316Ti - male BSP
AGR2H---
Male BSPP insert 60° cone, parallel thread.
AFR2H---
Male BSPP insert flat face, parallel thread.
AKR2H---
Male BSPT insert, taper thread.
54.08 Hose fittings with hydraulic tail - stainless steel AISI 316L / AISI 316Ti - male NPT
AGN2H---
Male NPT insert.
54.09 Hose fittings with hydraulic tail - stainless steel AISI 316L / AISI 316Ti - JIC threaded
DKJ2H---
Female UNF insert, 37° JIC seat.
AGJ2H---
Male UNF insert, 74° JIC seat.
55.01 Adaptor - steel - male BSP/male BSP & male BSP/female BSP
AGRAGRO---
Male BSPP / male BSPP both 60° cone seat adaptor.
AGRAKRO---
Male BSPP 60° cone seat / male BSPT adaptor.
AGRFFRO---
Male BSPP 60° cone seat / female BSPP adaptor.
56.01 Adaptor - stainless steel AISI 316L - male BSP/male BSP & male BSP/female BSP
AGRAGR2---
Male BSPP / male BSPP both 60° cone seat adaptor.
AGRAKR2---
Male BSPP 60° cone seat / male BSPT adaptor.
AGRFFR2---
Male BSPP 60° cone seat / female BSPP adaptor.
57.01 Adaptor - brass - male BSP/male BSP & male BSP/female BSP
AGRAGR4---
Male BSPP / male BSPP both 60° cone seat adaptor.
AGRAKR4---
Male BSPP 60° cone seat / male BSPT adaptor.
AGRFFR4---
Male BSPP 60° cone seat / female BSPP adaptor.
58.01 Industrial couplings - AISI 304L / 316L - crimping ferrules
FT1---
Crimping ferrule for smooth bore and convoluted PTFE hose.
FG1---
Crimping ferrule for convoluted PTFE hose TCS, TCAS, TCM,TCAM.
58.02 PTFE DIN flanges PN 10/16 - steel - AISI 304L
DFO---
Swivel DIN PN 10/16 flange in steel, AISI 304L stub-end. DIN 2642 Form F.
DFOD---
Swivel DIN PN 10/16 flange in steel, AISI 304L stub-end DIN 2642 Form B.
DF1---
Swivel DIN PN 10/16 flange in AISI 304L, AISI 304L stub-end. DIN 2642 Form F.
58.03 DIN flanges PN 10/16 - AISI 316L - AISI 316Ti
DF2---
Swivel DIN PN 10/16 flange in AISI 316L, AISI 304L stub-end. DIN 2642 Form F.
DF3---
Swivel DIN PN 10/16 flange in AISI 316Ti, AISI 304L stub-end. DIN 2642 Form F.
DF3D---
Swivel DIN PN 10/16 flange in AISI 316Ti, AISI 316Ti stub-end. DIN 2642 Form B.
58.04 DIN flanges PN 10/16 - AISI 316L
DF2F---
Fixed DIN PN 10/16 flange in AISI 316L. DIN 2633
58.05 ASA 150 lbs flanges, steel - AISI 304L - AISI 316L
AFO---
Swivel ASA 150 lbs flange in Steel, AISI 304L stub-end.
AF1---
304L Swivel ASA 150 lbs flange in AISI 304L , AISI 304L stub-end.
AF2---
Swivel ASA 150 lbs flange in AISI 316L, AISI 304L stub-end.
58.06 ASA 150 lbs flanges - AISI 316L
AF2F---
Fixed ASA 150 lbs flange in AISI 316L.
58.07 Industrial couplings AISI 316L / 316Ti
CGE2---
Cam & Groove coupling type E
CGC2---
Cam & Groove coupling type C
CGC2AL---
Cam & Groove coupling type C with locking device.
58.08 Industrial couplings AISI 316L / 316Ti
GSG2---
Symetric coupling.
VK2---
Male TW coupling Type VK.
MK2---
Female TW coupling Type MK.
58.09 Industrial couplings AISI 316L / 316Ti
TRI--2---
Tri-clamp coupling.
AKD2---
Male DIN 11851 coupling.
DKD2---
DIN 11851 female coupling.
58.10 Industrial couplings AISI 316L / 316Ti
SMSM2---
SMS male coupling.
SMSF---
SMS female coupling.
AFR2---
BSPP male coupling.
58.11 Industrial couplings AISI 316L / 316Ti
DFR2---
BSPP female coupling, flat seat.
DFR2---
BSPP female coupling, flat seat.
59.01 Industrial couplings with PTFE lining - AISI 304L / 316L - crimping ferrules
FR1---
Crimping ferrule for convoluted PTFE hose TCS, TCH, TCAH.
FG1---
Crimping ferrule for convoluted PTFE hose TCS, TCH, TCAH.
59.02 PTFE lined DIN flanges PN 10/16 - steel - AISI 304L
DFOL---
Swivel DIN PN 10/16 flange in steel, AISI 304L stub-end, PTFE lined. DIN 2642 Form F.
DFODL---
Swivel DIN PN 10/16 flange in steel, AISI 304L stub-end, PTFE lined. DIN 2642 Form B.
DF1L---
Swivel DIN PN 10/16 flange in AISI 304L, AISI 304L stub-end, PTFE lined. DIN 2642 Form F.
59.03 PTFE lined DIN flanges PN 10/16 - AISI 316L - AISI 316Ti
DF2L---
Swivel DIN PN 10/16 flange in AISI 316L, AISI 304L stub-end, PTFE lined. DIN 2642 Form F.
DF3L---
Swivel DIN PN 10/16 flange in AISI 316Ti, AISI 304L stub-end, PTFE lined. DIN 2642 Form F.
DF3DL---
Swivel DIN PN 10/16 flange in AISI 316Ti, AISI 316Ti stub-end, PTFE lined. DIN 2642 Form B.
59.04 PTFE lined DIN flanges PN 10/16 - AISI 316L
DF2FL---
Fixed DIN PN 10/16 flange in AISI 316L, PTFE lined. DIN 2633.
59.05 PTFE lined ASA 150 lbs flanges, steel - AISI 304L - AISI 316L
AFOL---
Swivel ASA 150 lbs flange in steel, AISI 304L stub-end PTFE lined.
AF1L---
Swivel ASA 150 lbs flange in AISI 304L , AISI 304L stub-end PTFE lined.
AF2L---
Swivel ASA 150 lbs flange in AISI 316L, AISI 304L stub-end PTFE lined.
59.06 PTFE lined ASA 150 lbs flanges - AISI 316L
AF2FL---
Fixed ASA 150 lbs flange in AISI 316L, PTFE lined.
59.07 Industrial couplings AISI 316L / 316Ti with PTFE lining
CGE2L---
Cam & Groove coupling type E with PTFE lining.
CGEL2---
Cam & Groove coupling type E with separate PTFE lining.
CGC2L---
Cam & Groove coupling type C with PTFE lining.
59.08 Industrial couplings AISI 316L / 316Ti with PTFE lining
CGCL2---
Cam & Groove coupling type C with separate PTFE lining.
CGCL2AL---
Cam & Groove coupling type C with locking device and separate PTFE lining.
59.09 Industrial couplings AISI 316L / 316Ti with PTFE lining
GSGL2---
Symetric coupling with separate PTFE lining.
VKL2---
Male TW coupling Type VK with separate PTFE lining.
MKL2---
Female TW coupling Type MK with separate PTFE lining.
59.10 Industrial couplings AISI 316L / 316Ti with PTFE lining
59.11 Industrial couplings AISI 316L / 316Ti with PTFE lining
DKD2L---
DIN 11851 female coupling with PTFE lining.
DKDL2---
DIN 11851 female coupling with separate PTFE lining.
SMSM2L---
SMS male coupling with PTFE lining.
59.12 Industrial couplings AISI 316L / 316Ti with PTFE lining
SMSML2---
SMS male coupling with separate PTFE lining.
SMSF2L---
SMS female coupling with PTFE lining.
SMSFL2---
SMS female coupling with separate PTFE lining.
59.13 Industrial couplings AISI 316L / 316Ti with PTFE lining
AFR2L---
BSPP male coupling with PTFE lining.
AFRL2---
BSPP male coupling with separate PTFE lining.
DFR2L--
BSPP female coupling with PTFE lining.
59.14 Industrial couplings AISI 316L / 316Ti with PTFE lining
DFRL2---
BSPP female coupling with separate PTFE lining.